Enviro 200P Ultra Grey 15L is a flexible waterproofing membrane for internal wet areas beneath tiles or other suitable protective finishes. Its water-based, urethane-modified copolymer formulation offers crack bridging, vertical hold and easy water clean-up.
Applications and pack
For bathroom, kitchen and laundry walls and floors over correctly prepared substrates, including concrete, renders, screeds, fibre cement and specified wet-area sheeting. Supplied in a 15L pail of grey membrane.
Coverage and preparation
For internal floors, apply two coats at 0.75L/m² per coat to achieve a minimum 1mm dry film. A 15L pail therefore covers approximately 10m² for this complete floor application. Wall requirements differ; use the product data sheet's application-specific rates. Consumption varies with the surface.
Prepare and prime the substrate and detail joints, corners and penetrations with compatible Envirosystems products before coating.
Drying and finishing
At 23°C and 50% relative humidity, the minimum recoat interval is 3–4 hours. Allow at least 24 hours after the last coat before direct tiling, ensuring the membrane is sufficiently dry. Full cure is 7 days; conditions affect timing.
Protect with a suitable finish. Follow the current product data sheet for substrate selection, priming, detailing and installation requirements.
